This article will illustrate how to turn on and activate your Q Series Minnow Pod.
Step 1: Plug the female end of the power cable into the power inlet found in the back of the unit and the male end into the nearest wall outlet.
Step 2: Turn the power switch ON by pushing it to the down position.
- The power switch is located on the back of the unit
- The power switch will illuminate GREEN when in the on position as shown in the graphic below
Step 3: Open the tablet door by using the Door Key provided in the hardware kit and inserting it in the key hole located on the right side of the Minnow Pod
Step 4: Located the tablet Power Button (shown in the graphic below) on the top side of the tablet. Press & hold the power button to turn ON the tablet. Allow up to 2 minutes to auto-connect to cellular.
Step 5: With the tablet powered ON, close and lock the cubby door using the key
NOTE: Place the door key in a safe and easily accessible place
Step 6: When prompted on the screen, enter your 4-digit access code.
Hint: Your 4-digit access code can be found in the "installation" section of your Minnow Onboarding Plan. If you can't find it, contact Minnow support at support@minnowpod.com or 503-897-9061